The Highly Recommended jobber length drill bit for hardened Products – Find Your Top Picks

Review and Comparison of 10 Top Rated jobber length drill bit for hardened products. Must Read Before Buy. Always go with the best in range products and never regret the decision later. Choose from hours of research and deeply researched best and long-run jobber length drill bit for hardened products.

In the following, we select the 10 best jobber length drill bit for hardened products to make you have a better purchasing experience.

HIDOTOL Cobalt Drill Bit Set 29 PCS – M35 High Speed Steel Twist Jobber Length Drill Bits for Hardened Metal, Stainless Steel, Cast Iron, Plastic and Wood with Indexed Round Case, 1/16″-1/2″ by 1/64″ increments

 

  • High Quality Material – High Speed Steel M35 (Cobalt 5%) provide extended tool life compared to ordinary drill bits when drilling hard materials,
  • Characteristics – 135° split point with round straight shank, self-centering prevent walking, make drilling precise and faster. Fully Ground twist design helps clear particles faster, decreases friction and heat for a cooler drilling performance.
  • Widely Used – M35 Cobalt High Speed Steel is more suitable for tough, high tensile strength material. Particularly successful in cutting harden metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and it also can be used for softer materials.
  • Specifications – Set of 29pcs jobber length drill bits includes: 1/16″, 5/64″, 3/32″, 7/64″, 1/8″, 9/64″, 5/32″, 11/64″, 3/16″, 13/64″, 7/32″, 15/64″, 1/4″, 17/64″, 9/32″, 19/64″, 5/16″, 21/64″, 11/32″, 23/64″, 3/8″, 25/64″, 13/32″, 27/64″, 7/16″, 29/64″, 15/32″, 31/64″, 1/2″, by 1/64″ Increments.
  • 100% Satisfaction Guarantee – If you are not fully satisfied with our product for any reason, please feel free to contact us, we will try our best to serve you.

Product details help you buy the correct jobber length drill bit for hardened product

“As a customer, you want to buy things that are of good quality. You don’t want to waste your money on junk. I get it.”
“You’re unsure about which product is the best one for you, so you have tons of questions in your head.” “What should I do?” “Do these products really work?” “Should I buy this or not?”

These are all valid concerns and they deserve answers! So let’s talk about the jobber length drill bit for hardened product details.

Check the details of jobber length drill bit for hardened products to make sure it’s right for you. Meaning: look at what is offered and compare them against your needs, preferences, or budget.

PS: You want this information because you are interested in buying something, and when there is an opportunity for discounts or coupon codes (which often exist), knowing what they offer can make your purchase decision easier!

COMOWARE Cobalt Drill Bit Set – 13Pcs M35 High Speed Steel Twist Jobber Length Drill Bit for Hardened Metal, Stainless Steel, Cast Iron and Wood Plastic, 1/16″-1/4″

 

  • ALL SIZES YOU NEED: 13 most commonly-used sizes (1/16″,5/64″,3/32″,7/64″,1/8″,9/64″,5/32″,11/64″,3/16″,13/64″,7/32″,15/64″,1/4″) to satisfy all your needs.
  • HSS WITH 5% COBALT: Durable, Higher Heat & Abrasion Resistance. High Speed Steel M35 construction with amber finish for proven capability and durability
  • PRECISE 135° SPLIT POINT & TWIST DESIGN: 135° split point prevents “walking” and slippery, increasing cutting speed and penetrates hard material without a pilot hole.
  • PROFESSIONAL & WIDELY USE: M35 Cobalt HSS is more suitable for hardened material. Particularly successful in cutting through hard metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials.
  • EASY TO CARRY: This drill bits set fits the majority of power drill currently on the market and come with a portable plastic bag for easy storage and organization.

1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

 

  • JOBBER LENGTH: 1/8-inch cutting diameter, 1-5/8-inch flute length, 2-3/4-inch overall length, 135 degree split point, straight shank
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel’s high red hardness, provide strong durable performance compared to typical hss drill bits
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit’s hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits
  • APPLICATION: best used for drilling in hard metal, including stainless steel
  • INCLUDE: 12 pieces of 1/8-inch cobalt drill bits with case

3/32 Inch Cobalt Drill Bit Set, M35 HSS Twist Jobber Length for Hardened Metal, Stainless Steel, Cast Iron, Pack of 10

 

  • HIGH QUALITY MATERIAL: 5% Cobalt High Speed Steel M35 provide extended tool life compared to ordinary drill bits.Durable, Higher Heat & Abrasion Resistance.
  • PRECISE 135°SPLIT POINT & TWIST DESIGN: Prevent walking, clear chips and particles faster.
  • PROFESSIONAL & WIDELY USE: M35 Cobalt HSS is more suitable for hardened material. Particularly successful in cutting through hard metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials.
  • Pay attention to speed, pressure and heat control during drilling.
  • INCLUDE: 10 pieces of 3/32-Inch cobalt drill bits

You may find our jobber length drill bit for hardened product has many advantages. Click on the jobber length drill bit for hardened product link in the blog for more details.

The jobber length drill bit for hardened products we recommend have many advantages. Click on the jobber length drill bit for hardened product link for more details.

Many of the jobber length drill bit for hardened products we recommend have many advantages. Click on the jobber length drill bit for hardened product link in our email newsletter for more details.

Our jobber length drill bit for hardened products are carefully selected for their benefits and performance. Learn more about them by clicking on the jobber length drill bit for hardened product link in this blog.

3/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

 

  • JOBBER LENGTH: 3/16-inch cutting diameter, 2-5/16-inch flute length, 3-1/2-inch overall length, 135 degree split point, 3-flat shank
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel’s high red hardness, provide strong durable performance compared to typical hss drill bits
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit’s hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits
  • APPLICATION: best used for drilling in hard metal, including stainless steel
  • INCLUDE: 12 pieces of 3/16-inch cobalt drill bits with case

The jobber length drill bit for hardened product details you must check before a purchase

Checking the details on a jobber length drill bit for hardened product before buying is very important. If you are not careful, you might end up with something that doesn’t work for what you need it to do. To help you determine if the product will work for your needs, here are some things to look at when checking out a product.

We go over some ways you can check jobber length drill bit for hardened product details before making your purchase. We hope this article helps out those who are looking for guidance in the world of shopping!

If you want to know more about a jobber length drill bit for hardened product, there are various ways in which you can do this. For example, if you’re looking for information on the warranty that comes with a product, then it’s worth checking the manufacturer’s website or contacting customer service. In addition to this, it is also possible to check reviews from other customers who have purchased and used the same products as yourself. This way of researching before buying can help ensure that you buy something suitable for your needs and budget.

Other tips:
a.) Check the manufacturer’s website
b.) Use social media

Chicago Latrobe 57716 150 Series High-Speed Steel Jobber Length Drill Bit Set with Metal Case, Black Oxide Finish, 118 Degree Conventional Point, Wire Size, 60-piece, #60 – #1

 

  • Set of 60 jobber length drill bits includes one each of wire gauge sizes #60 through #1
  • High-speed steel (HSS) provides hardness for wear resistance
  • Black oxide finish reduces bit wear while promoting chip and coolant flow on ferrous material
  • 118-degree conventional point for a range of drilling applications
  • Jobber length drill bit has a midrange drilling depth suitable for general-purpose drilling applications
  • Made in the USA

POWERTEC QDB2011 Cobalt Drill Bit 3/8-Inch | 135 Degree Drill Bit Set – 4 Pack

 

  • INCLUDES: 3/8-Inch Cobalt Jobber Drill Bit Set (4 piece)
  • APPLICATION(S): Cobalt drill bit for metal, stainless steel, nickel alloy, cast iron and softer material
  • PREMIUM QUALITY: These M35 cobalt drill bits are made with the finest high speed steel ideal for high abrasive, optimal heat treatment, and wear resistance for long-term durability
  • SELF CENTERING: 135 degree split point drill bits penetrate quicker with less pressure needed – minimizing bit walking (wandering) while ensuring a crisp, centered drill hole that doesn’t require a center punch
  • HIGH UTILITY: Excels in metalworking applications when drilling in high-tensile strength materials, tip can be sharpened to ensure peak-performance readiness at all times, and works in both keyed and key-less drill chucks

CaRoller Drill Bit Set – M35 Cobalt Drill Bit – 15 Pcs High Speed Steel Twist Jobber Length Drill Set 1/16″-3/8″ for Hardened Metal, Stainless Steel, Cast Iron, Wood and Plastic with Round Shank , Plastic box Storage

 

  • ✔【HIGH QUALITY MATERIAL】: M35 Cobalt High Speed Steel provide extended tool life compared to ordinary drill bits when drilling hard materials.
  • ✔【TWIST DESIGN & CHARACTERISTICS】: 135-degree split-point and twist design, reduce feed pressure for easier penetration, improve cutting speed. Gold oxide finish and round straight shanks, precision fully ground. Self-centering prevent walking, helps clear chips and debris faster.
  • ✔【WIDELY USED】: M35 Cobalt High Speed Steel is more suitable for tough, high tensile strength material. Particularly successful in cutting harden metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and it also can be used for softer materials.
  • ✔【SPECIFICATIONS】: Drill bit set 15 pcs cobalt jobber length drill bit set , include: 1/16″x2pcs, 5/64″x2pcs, 3/32″x2pcs, 7/64″, 1/8″x2pcs, 5/32″, 11/64″, 3/16″,1/4″, 5/16″,3/8″.
  • ✔【ORGANIZED HOLDER】: The 15 pcs set include the drill bit holder with size index for easy storage and organizing. Drill bit set is suitable for most brands on the market. Reliable quality and considerate service. If you have any questions, please feel free to contact us, we will do our best to serve you.

This is a high-quality jobber length drill bit for hardened product, and after-sales service is very important.

Customer satisfaction is our top concern. If this item does not meet your expectations, please do not hesitate to contact us.

After-sales service is very important, because consumers will buy a high-quality jobber length drill bit for hardened product, and good after-sales service can make consumers use this jobber length drill bit for hardened product better.

 

COMOWARE Cobalt Drill Bit Set- 15Pcs M35 High Speed Steel Twist Jobber Length for Hardened Metal, Stainless Steel, Cast Iron and Wood Plastic with Indexed Storage Case, 1/16″-3/8″

 

  • HIGH QUALITY MATERIAL: 5% Cobalt High Speed Steel M35 provide extended tool life compared to ordinary drill bits. Durable and strong
  • TWIST DESIGN & PERFORMANCE: PRECISE 135°SPLIT POINT, gold oxide finish and round straight shanks. Prevent walking, clear chips and particles faster.Produced by precision fully ground which ensures chips move smoothly.
  • PROFESSIONAL & WIDELY USE: M35 Cobalt HSS is more suitable for hardened material. Particularly successful in cutting through hard metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials.
  • SIZE INCLUDED: 15pcs jobber length drill bit set with plastic storage case including sizes:1/16″ 2pc,5/64″ 1pc ,3/32″ 2pc,7/64″ 1pc,1/8″ 2pc ,9/64″ 1pc, 5/32″ 1pc, 3/16″ 1pc, 7/32″ 1pc, 1/4″ 1pc, 5/16″ 1pc, 3/8″ 1pc.
  • 100% SATISFACTION GUARANTEE: If you are not 100% satisfied with your purchase for any reason whatsoever simply please feel free to contact us.

We hope you have found this article to be informative and helpful. And We hope you enjoyed our list of the best jobber length drill bit for hardened products online. Did we miss any that you would like to see added? If so, please let us know in the comments section below!

Do not forget to share what your favorite jobber length drill bit for hardened product is, and we will try it out!